Ti3C2 solution Ti3C2 solution

Ti3C2 Solution

SKU: SOL-MAX-TI3C2-IS
$410.00

This product contains Ti3C2 flakes solution in ethanol (or other) media. Other solutions are also available please drop a note during the checkout process about your desired solution. The Ti3C2 solution has been developed by pulsed ultrasonic treatment of high quality Ti3C2 crystals synthesized through microwave reactor and acid treatment technique to achieve high quality Ti3C2 sheets dispersed in solution. The crystallinity of Ti3C2 flakes has been confirmed through electron energy dispersive spectroscopy (EDAX), Raman spectroscopy (FWHM<5 cm-1), and scanning electron microscopy (SEM) measurements. Lateral sizes of Ti3C2 flakes deposited onto different substrates range from ~10nm to ~5 micrometers while thickness range from 1L to few and multilayers.

Note on volume, concentration, and solvent type: International shipping mostly allows only small volume shipping, thus we ship supersaturated 2D solutions (~100-300 mg/L depending on the type of 2D layers). These supersaturated solutions are designed specifically so that you can dilute to produce large volume (250-500mL) solutions. In our product, ethanol is used (and recommended) as the dispersant solvent owing to its environmental stability, thermal stability, dispersant properties, and non-contaminating nature. However, if your research needs other solvents, either contact us or drop a note during the check out process regarding your desired solution type. 

The properties of Ti3C2 used in Ti3C2 solution synthesis

Atomic structure of MXene Ti3C2

Ti3C2 MXene crystal structure

SEM images collected from MXene Ti3C 2vdW layers

Ti3C2 MXene SEM images

Ti3C2 MXene SEM images

 

 

Full Description
Formula: Ti3C2
Solution Type *
Qty
  • Description

    Ti3C2 Solution

    This product contains Ti3C2 flakes solution in ethanol (or other) media. Other solutions are also available please drop a note during the checkout process about your desired solution. The Ti3C2 solution has been developed by pulsed ultrasonic treatment of high quality Ti3C2 crystals synthesized through microwave reactor and acid treatment technique to achieve high quality Ti3C2 sheets dispersed in solution. The crystallinity of Ti3C2 flakes has been confirmed through electron energy dispersive spectroscopy (EDAX), Raman spectroscopy (FWHM<5 cm-1), and scanning electron microscopy (SEM) measurements. Lateral sizes of Ti3C2 flakes deposited onto different substrates range from ~10nm to ~5 micrometers while thickness range from 1L to few and multilayers.

    Note on volume, concentration, and solvent type: International shipping mostly allows only small volume shipping, thus we ship supersaturated 2D solutions (~100-300 mg/L depending on the type of 2D layers). These supersaturated solutions are designed specifically so that you can dilute to produce large volume (250-500mL) solutions. In our product, ethanol is used (and recommended) as the dispersant solvent owing to its environmental stability, thermal stability, dispersant properties, and non-contaminating nature. However, if your research needs other solvents, either contact us or drop a note during the check out process regarding your desired solution type. 

    The properties of Ti3C2 used in Ti3C2 solution synthesis

    Atomic structure of MXene Ti3C2

    Ti3C2 MXene crystal structure

    SEM images collected from MXene Ti3C 2vdW layers

    Ti3C2 MXene SEM images

    Ti3C2 MXene SEM images